Carbon nanotube doped veils
- TECHNICAL SERVICE
Development of innovative and functional meltblown veils (advances nonwovens, lightweight, reduced electrical resistivity, compatibility with end user resins, wide range of areal weight, easy & safe way to implement nanofillers to final product). Various possibilities for the optimization. Production trials with „difficult to process” polymers/nanocomposites.
Functional veils (non-woven fabric) produced in the one stage process. Fully automatic and continuous melt blown extrusion line. Design of this line is the result of TMBK’s experience in the process of melt spinning a wide range of polymers and thermoplastic nanocomposites. In a one-stage process TMBK can produce a non-woven structure in the form of veils from the raw materials (neat or nano-doped) that are difficult to process by melt blowing. Depending on the raw material, we can produce nonwovens in the range of 10-100 gsm with a linear speed of 30-300 m/h. The pilot line is characterised by modular design and flexibility. The line has been designed to minimize degradation of the raw materials as well as to increase output consistency and stability. A configurable die head allows for adapting to specific material requirements. The spin pack is easy to replace, therefore the length, diameter and shape of the nozzles can be varied. An automated process minimizes the amount of plastic waste as well as the human contact with the veils during the production procedure. The quality of produced veils is controlled.
- Electrical properties management
- Lightweight properties
- Mechanical performance
- Thermal properties management
- Polymer based service
- [PILOT LINES] Nano-intermediate
FIELD OF APPLICATION